When you wake up feeling creative, you make use of that! I have always wanted to redo the front door of our 1940s home , but never felt motivated enough until a few days ago. I woke up feeling creative, and decided to put all of that determination into our front door!
These spanish tiles were first to go. I couldn’t stand them from the moment we purchased the house. I also knew the red had to go. Some love a traditional brick home with red door…but not me. I needed something brighter and fresh looking. An aqua door is a bit too ‘trendy’ for me and every other color looked boring or too eccentric. I browsed through Pinterest over and over and finally came across this picture! It is the perfect mix of blue/green'/grey I didn’t even know I wanted.
The color is called Pigeon 25 by Farrow and Ball. As we do with all of our paints, we had Lowe’s color match it to a Valspar paint to save money. We decided on a satin gloss in the DuraMax brand by Valspar. I barely used half of a quart of paint on the front of the door.
I’m not sure if the door is original to the home - but I think it may be. Our windows are original (something we need to replace at some point :)). After seeing the layers of paint the door had I knew I had gotten myself into a project much greater than just slapping on a new coat of paint. I had to redo the door completely.
I started by removing the tiles with a metal scrapper. I chose this over a hammer because I didn’t want to rip off any wood on accident. Remove any and all hardware at this point also!
Next, I began sanding. I use this sander and LOVE it. Inexpensive, convenient and user friendly if you only need it for side projects here and there. Here’s another one that has better reviews than mine too! I had to switch between two different tools attachments to get the slanted surface of the window panes. Don’t touch the window with the electric sander either - it will scratch windows. Use a sanding block if needed to get close. Make sure to wear face covering or you will be sneezing paint colored boogies for days after haha. If you don’t have an electric sander, you can use a sanding block on the whole door also.
If you don’t want to sand the door down completely (like me)..make sure to at least sand off :
chipping paint & it’s edges
the outer glossy layer
old paint dripping/running spots until flat
paint pulling away from the surface
imperfections from previous painting/build up/flaws from pulling off numbers/knockers
Then the door needs to be cleaned well. I take my vacuum hose attachment to the whole door first, then wipe with a damp rag and then a dry rag. Scrub off any dirt build up and get the crevices/area attached to windows cleaned thoroughly.
Now you are ready to paint! I chose to hand paint with this brush. I prefer the hand painted look, but if not you can use a small roller. Some suggest foam but ensure you have the foam soaked in paint before applying to reduce air bubbles on the door when rolling. I put one coat on and let it dry overnight, then followed with the second coat the next day.
After removing the tape I realized it pulled off some paint and allowed some red to show through on the window edges. I touched up spots around the windows with a small paint brush I usually would use for acrylic painting. This takes a steady hand, but usually if you go too far on a window you can scrape it off.
I chose not to prime because I have an exterior storm door and the paint I chose is higher quality with primer already in it. I needed 2 coats of paint total!
Lastly I installed this new door knob (under $50). I linked a few other great options at the bottom of the post too . We added these aluminum numbers to the door front. Then, I spray painted the knocker and dead bolt with this paint I swear by and use for almost all metals in our home. This is how I sprayed the deadbolt since It is not removable. I used tape and packaging/newspaper/plastic to cover the surrounding areas , then sprayed.
I decided last-minute to spray our storm door hardware also to match since it is really seen more. Since I’m not using a sealant/secondary protective spray I may end up having to respray these over and over as they chip and scratch but it was a breeze to do so I’m not too worried. And just like that we are DONE! It completely changes the look and feel of our home.
Next on our list is to find new planters and plants for our front porch. :) stay tuned!
QUICK LINKS:
Paint Color: Pigeon No.25 by Farrow & Ball
Metal Spray Paint : Rustoleum Oil Rubbed Bronze